Bluetooth Setup; Add A Cell Phone - AT&T TL92271 User Manual

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone with your telephone, you must
first pair and connect your Bluetooth cellular phone with the telephone base.
All TL92271/TL92321/TL92371/TL92421/TL92471 handsets can be used
to make or answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 30
feet). When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth
device. Refer to your cell phone user's manual to learn how to search for or
add new Bluetooth devices.
To pair and connect a cell phone:
MENU
1. Press
2. Press CID or
press SELECT.
3. Press SELECT
SELECT
4. Press
displays Please wait... followed by 1. If cell is connected
to BT device, please disconnect it.
• If there are already 4 paired devices on the device
list, the 4th device on the device list will be
automatically removed, regardless of whether the
new device pairing is successful or not.
• If there are already 2 active devices on the device
list with prefix D1: or D2:, the handset shows
Only 2 devices can be ready for connection. You
are prompted to deactivate an active device.
5. Press NEXT. The screen displays 2. Place cell phone next
to base.
• All devices that are connected to the telephone
base are disconnected until the pairing process
is completed.
6. Press NEXT to turn on the telephone base discoverable
mode. The screen displays Set cell to search base: AT&T DECT 6.0
discoverable PIN: 0000. Promptly turn on the Bluetooth feature of your
cell phone and search for or add new devices.
in idle mode to enter the main menu.
DIR to highlight Bluetooth, then
to choose Add device.
again to choose Add cellular.
The screen
14
Directory
Cal ler ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
ADD DEVICE
Add cel lular
Add headset
BACK SELECT
Set cel l to
search base:
AT&T DECT 6.0
discoverable
PIN:0000