Bluetooth Setup; Add A Cell Phone - AT&T TL96273 User Manual

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone with your telephone, you must first
pair and connect your Bluetooth cellular phone with the telephone base. The
TL96273/TL96373/TL96473/TL96323
calls on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth device.
Refer to your cell phone user's manual to learn how to search for or add new
Bluetooth devices.
To pair and connect a cell phone:
1. Press MENU
2. Press CID
3. Press SELECT
4. Press CID
screen displays
device, please disconnect it.
• If there are already 4 paired devices on the device list, the 4th device
on the device list will be automatically removed, regardless of whether
the new device pairing is successful or
• If there are already 2 active devices on the device list with prefix D1:
or D2:, the telephone base shows Only 2 devices can be ready for
connection. You are prompted to deactivate an active device.
5. Press NEXT
• All devices that are connected to the telephone base
are disconnected until the pairing process is completed.
6. Press NEXT
displays Set cell to search base: AT&T DECT 6.0 discoverable PIN: 0000.
Promptly turn on the Bluetooth feature of your cell phone and search for
or add new devices.
on the telephone base in idle mode to enter the main menu.
or DIR to highlight Bluetooth, then press
to choose Add device.
or DIR to highlight Add cellular, then press SELECT. The
Please wait... followed by 1. If cell is connected to BT
. The screen displays 2. Place cell phone next to base.
to turn on the telephone base discoverable mode. The screen
can then be used to make or answer
not.
14
The
SELECT .