Table of Contents
Advertisement
Bluetooth
Bluetooth setup
To use a Bluetooth enabled cellular phone or headset with your telephone, you
must first pair and connect your Bluetooth cellular phone or headset with the
telephone base. Then, the DL72119/DL72219/DL72319/DL72419/DL72519 can
be used to make or answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 15 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.
Add a cell phone
Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth device.
Refer to your cell phone user's manual to learn how to search for or add new
Bluetooth devices.
To pair and connect a cell phone:
1. Choose a slot to pair the cell phone. Press
and hold CELL 1 or CELL 2 on the telephone
base for about four seconds until the CELL 1
or CELL 2 light flashes.
If there is already a cell phone in the slot,
f
the existing cell phone will be erased
from cell devices list.
2. Turn on the Bluetooth feature of your cell
phone and search for or add new devices.
Once your cell phone finds your AT&T phone (AT&T DL72x19), press the
appropriate key on your cell phone to continue the pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base.
f
The default PIN of the telephone base is 0000.
All cell phones that are connected to the telephone base are disconnected
f
temporarily until the pairing process is complete.
When a device is successfully paired and connected,
the corresponding status icon (
corresponding device light on the telephone base
(CELL 1 or CELL 2) turns on.
1
or
) displays. The
2
19
HANDSET 1
ECO
1
2
10:30
11/20
PM
Advertisement
Table of Contents
