Engine Installation - Suzuki DR-Z70 Service Manual

ENGINE INSTALLATION

Install the engine in the reverse order of engine removal.
• Install the engine mounting bolts and nuts as shown in the fol-
lowing illustration.
• Tighten the engine mounting nuts to the specified torque.
NOTE:
The engine mounting nuts are self-locking. Once the nuts have
been removed, they are no longer of any use.
Engine mounting nut: 31 N·m (3.1 kgf-m, 22.5 lb-ft)
• Install the engine sprocket 1 with the drive chain.
• Install the snap ring 2 .
The removed snap ring must be replaced with a new
one.
The drive chain joint clip should be attached in the
way that the slit end will face opposite to the direction
of travel.
• Install the carburetor.
NOTE:
Install the clamp as shown in the illustration.
LH RH
Air cleaner box
Upper
RH LH
ENGINE 3-6