Removing And Installing Wheel Housing Trim (4-Door) - Volkswagen Golf 2004 Workshop Manual

Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
3.3 Removing and installing wheel housing
trim (4-door)
Note
Removal and installation is described for the left vehicle side.
Follow same instructions for the right side as appropriate.
3.3.1 Removing
– Remove rear bench seat
– Remove side padding (4-door):
♦ With rear side airbags
♦ Without rear side airbag, ▸06/2005
– Remove the two bolts -1- (1.2 Nm).
– Detach clips -2- from body flange.
– Pull trim -3- out from beading of door seal -4-.
– Pull moulding out of mountings in sill panel moulding -5-.
– Pull trim out forwards under C-pillar trim.
84
Rep. Gr.68 - Interior equipment
⇒ page 304 .
⇒ page 306
⇒ page 307 .