Volkswagen Golf 2004 Workshop Manual page 239

4.6.1 Removing
– If vehicle is equipped with an interior monitor, switch off igni‐
tion.
– Remove upper B-pillar trim. Belt end anchor or anchor rail for
front seat belt need not be removed
– Remove sill panel moulding (4-door)
– Remove the two bolts -1- (4 Nm).
– Release trim -3- from door seal beading.
– Pull trim, in area of guide -2-, out of mountings in body.
– If vehicle is equipped with interior monitoring system, discon‐
nect wiring harness from sensor.
4.6.2 Installing
– Install in reverse order of removal.
General body repairs, interior - Edition 05.2010
⇒ page 228 .
⇒ page 82 .
Golf 2004 ➤ , Golf 2009 ➤
4. Pillar and side trims
231