1.2.2
Installing
– Lift seat through front door opening.
– Locate seat on centralizing pins, mounted on sides of tunnel,
and into respective openings in floor.
– Tighten bolt -1- (40 Nm).
– Tighten bolt -2- (40 Nm).
WARNING
If a thread in seat cross member mounting plate is damaged
on seat installation, reworking damaged threads is prohibited!
In this case, the seat cross member mounting plate must be
replaced.
If seat cross member mounting plate threads have been dam‐
aged:
– Replace the affected seat cross member mounting plate
⇒ Body Repairs; Rep. Gr. 51
Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
261
1. Front seats