– Pull 4-door wheel housing trim out of mountings in transition
area to sill panel moulding.
– Pull sill panel moulding out of front area of sill and beading of
door seal.
– Detach guide -1- from lower B-pillar trim.
– Pull sill panel moulding out of rear area of sill and beading of
door seal.
– Detach guide -2- from lower B-pillar trim.
– Open tab -3- and guide seat belt out through.
Note
Before installing, check 6 securing clips for damage and renew if necessary.
3.2.2
Installing
– Install in reverse order of removal.
Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
83
3. Sill panel trims