Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
5.8
Installing repair kit for seat occupied rec‐
ognition (vehicles with electrically oper‐
ated seats)
Note
When installing, ensure that no wiring harness from the seat
♦
heating system is located between the padding and mat for
seat occupied recognition.
The pressure hose should be routed without kinks.
♦
Adhesive labels on connectors should not be damaged.
♦
Once vehicle has been reconnected to onboard electrical sys‐
♦
tem, check for clearance of components that have been re‐
newed by moving seat position.
After seat occupied recognition has been renewed, a diagnosis
tester must be used that has function "Guided fault finding" to
carry out basic settings of seat occupied recognition system.
172
Rep. Gr.69 - Passenger protection