Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
– Pull door trim upwards vertically out of window slot.
– Now unhook Bowden cable -1- from interior door handle on
inside of door trim.
– Depending on vehicle equipment, disconnect wiring harness‐
es from door trim.
Installing
– Install in reverse order of removal.
If door trim is renewed on vehicles with manual window regulator,
it is necessary to adjust the new door trim using workshop equip‐
ment. To do this, a hole must be made in the door trim for the
window regulator shaft.
Note
Before installing, check fasteners for damage and renew if nec‐
essary.
220
Rep. Gr.70 - Trim, insulation