– Using wedge -3409- , lever sun light sensor -1- out of mounting
in indirect ventilation system -2-.
– Disconnect wiring harness from photo sensor.
– Remove bolt -3- (1.5 Nm).
Note
For greater clarity, the components in the following illustrations are shown removed.
– Insert two wedges -3409- , as shown, into joint between indi‐
rect ventilation system -1- and vent -2-.
– Using wedge -3409- press metal clips -3- and -4- to rear and
pull indirect ventilation upwards and out of mountings in vent
-arrow-.
Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
2. Compartments, covers and trims
51