Removing And Installing Seat (Electric) Base - Volkswagen Golf 2004 Workshop Manual

Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
1.28 Removing and installing seat (electric)
base
Removal and installation of the seat base is described for the front
left seat frame. Apply the same instructions for removal and in‐
stallation on the front right seat frame as appropriate.
1.28.1 Removing
– Attach seat repair stand -VAS 6136- to engine and gearbox
support -VAS 6095- .
– Remove front seat ⇒ page 260
– Secure seat to seat repair stand -VAS 6136- .
– Remove right side trim on seat
– Remove left side trim on electrically adjustable seat
⇒ page 267 .
– Remove bar and operating lever for front seat
– Remove front seat drawer mounting
– Remove front seat backrest
– Remove cover and padding, front seat cushion
– Unscrew bolts -1- and -2- on right.
– Remove bolt -3- in rear area.
Note
Bolt -3- points from inside out when installed.
– Remove bolt -4- in front area.
– Release seat pan -5- from longitudinal seat adjustment -6-.
296
Rep. Gr.72 - Seat frames
.
⇒ page 276 .
⇒ page 275
⇒ page 271 .
⇒ page 281 .
⇒ page 309
.
.