Volkswagen Golf 2004 Workshop Manual page 270

Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
– Remove airbag adapter -VAS 6229- or airbag adapter -VAS
6281- .
– Lock side airbag wiring harness -6- into coupling station.
– Depending on vehicle equipment, reconnect all other wiring
harnesses into coupling station.
– Secure wiring harness in fastener on floor and fit cover cap
-5- onto coupling station.
– Reinstall seat drawer, if fitted.
– Switch ignition on.
WARNING
Ensure that nobody is in the vehicle.
– Reconnect vehicle battery ⇒ Rep. Gr. 27 .
– Move seat to foremost position using longitudinal adjustment.
– Tighten bolt -3- (40 Nm).
– Tighten bolt -4- (40 Nm).
WARNING
If a thread in seat cross member mounting plate is damaged
on seat installation, reworking damaged threads is prohibited!
In this case, the seat cross member mounting plate must be
replaced.
262
Rep. Gr.72 - Seat frames