– Disconnect connector -3- for front seat heating, if fitted.
– Disconnect black connector -5- for seat belt force sensor for
seat occupied recognition -G453- .
– Disconnect yellow connector -4- for front passenger side belt
switch -E25- .
– Disconnect connector -6- for front seat backrest heating, if fit‐
ted.
– Cut open cable ties for wiring harness -2-.
– Slide white retainer -1- to left and release retainer from seat
frame.
– Remove all connectors from retainer.
Caution
Connector must not be removed from seat occupied recogni‐
tion control unit -J706- .
Golf 2004 ➤ , Golf 2009 ➤
General body repairs, interior - Edition 05.2010
5. Seat occupied recognition (USA)
159