Setting The Scan Beam - Avery Dennison Monarch Verifier 938 Operating Instructions Manual

S e t t i n g t h e S c a n B e a m
You can control whether the scan beam is turned off between labels or
left on continuously. Depending on your application, you may want the
scan beam on continuously.
To change the setting, from the Main Menu, select Setup, then Verifier.
Then follow these steps.
Press or
1.
VERIFIER
Scan Beam
Press Enter/Pause. The current setting is displayed, for example:
2.
SCAN BEAM
Off When Idle
Press or
3.
you want, press Enter/Pause.
Do not let the verifier stop on a bar code when logging data,
because it continues to log data from that bar code.
Press Escape/Clear until you see the Main Menu.
4.
until you see
to see the other option. After you display the option
Configuring the Printer 5-3