G E T T I N G S T A R T E D
Use these Operating Instructions to set up, use, and configure the
Monarch 938 verifier. The verifier works with the Monarch
9855 printer and 9860 printer with knife. The verifier can scan a wide
variety of one-dimensional parallel bar codes. However, it cannot scan
MSI bar codes or two-dimensional bar codes.
Information in this document supercedes information in previous versions.
Check our Web site (www.paxar.com) for the latest documentation and
release information.
The verifier saves data from each bar code it scans. You can use
immediate commands to upload scan grade data and bar code data from
the verifier. Refer to the Programmer's Addendum available on our Web
site for more information.
U s i n g t h i s M a n u a l
Following is a summary of the contents of this manual:
Chapter
1
Getting Started
2
Installation &
Setup
3
Calibrating the
Verifier
4
Using the VCT
5
Configuring the
Printer
6
Troubleshooting
A
Specifications
Contents
Information you should know before using the
verifier.
Installing and positioning the verifier.
Setting up the verifier with ScanVision software.
Changing parameters, sending files, and sample
configuration packets.
Setting the printer to work with your verifier.
Common problems and their solutions.
Verifier and laser scanner specifications.
1
Getting Started 1-1