Table of Contents
Advertisement
Statement of FCC Compliance: Canada
This Class B digital apparatus meets all requirements of the Canadian
interference-Causing Equipment Regulations.
Cet appareil numénque de la classe B respecte toutes les exigences du
Règlement sur le maténel brouilleur du Canada.
CE:
The unit will contain NRTL and/or CE quality assurance labels.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this operator's manual, may cause
harmful interference to radio communications. Operating this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the problem at his own expense.
Use with NRTL-Listed Equipment
The verifier should be used only with printers that are NRTL listed. The verifier
is intended to be supplied by a NRTL Listed power supply (QQGQ) or (EPBU) or
receives power from the host unit (NRTL Listed Printer), output rated 5Vdc,
minimum 300mA maximum 1A.
L a s e r S c a n n e r S a f e t y
IEC Class3; CDRH Class III.
Cautions:
♦ Never stare directly into the laser
beam.
♦ Never stare directly at a reflected
image of the laser beam.
♦ Avoid exposure to the laser beam.
♦ Use of controls or adjustments or
performance of procedures other
than those specified herein may
result in hazardous radiation
exposure.
♦ Use the verifier only with NRTL
listed bar code printers.
♦ These laser light caution labels must be affixed to your verifier: If they are
not, contact Paxar immediately.]
♦ Laser light - Do not stare into the beam.
Paxar shall not be liable for direct, indirect, or consequential damages, costs,
expenses, lost profits, or lost savings resulting from the use, operation, or
malfunction of the verifier.
Advertisement
Table of Contents
