C h a n g i n g A d d i t i o n a l P a r a m e t e r s
In expert mode, you can use this screen to set additional verifier
commands that are not set through the Verifier Configuration Tool.
The additional commands can be found in the SV Series Operator's Guide
included with your verifier.
1.
Click the Additional Values tab.
2.
Type a command, for example ~OS0. This command sets the
transmission data format to 0. Refer to the SV Series Operator's
Guide for more information about this command.
3.
Click Add to List. The command is added to the User Defined
Additional Parameters list.
S a v i n g a n d S e n d i n g F i l e s
You have several options:
♦
Save as MPCL
♦
Store the configuration in the printer
♦
Send the configuration to the verifier (via the printer or direct
connection)
4-4 Operating Instructions