P r i n t i n g a S u m m a r y L a b e l
The summary label is based on the data collected by the verifier since the
data was last cleared. You can print a summary label showing
♦
the number of labels verified sucessfully since last cleared
♦
the number of labels that failed verification/scanning since last cleared
Depending on your application and volume of labels printed, you may
want to print this summary label daily or after each batch.
To change the setting, from the Main Menu, select Setup, then Verifier.
Then follow these steps.
1.
Press
or
VERIFIER
Print Summary
Press Enter/Pause. The summary label prints.
2.
Press Escape/Clear until you see the Main Menu.
3.
5-6 Operating Instructions
until you see