Setting The Error Action - Avery Dennison Monarch Verifier 938 Operating Instructions Manual

S e t t i n g t h e E r r o r A c t i o n
The recovery action from an error condition is in the Setup, Supply menu.
You can change how the printer responds to a bad scan. The choices
include normal and overstrike/continue one to five consecutive bad
scans. The overstrike pattern is created to prevent someone from using
a bad label.
Selecting overstrike and continue 1x-5x sets the number of times the
printer prints an overstrike pattern on consecutively bad labels before
generating an error. The user must clear the error before operation can
continue.
Supply
Type
Dispense
Position
Do not use the overstrike action with
♦
Peel mode
♦
Linerless supplies
♦
String tag supplies
For more information about the error actions, see the following table:
Error Action
Overstrike/Continue 1-5
Normal (no overstrike)
5-8 Operating Instructions
M AIN MENU
Ribbon Speed
Backfeed Separators
Distance
Standard
Peel
No
Yes
Setup
Supply
Feed Mode
Skip Index
Verifier
with Peel
No
Yes
Backfeed Positioning
Knife Error
Control Action
RFID with
Peel
No
Yes