S e t t i n g t h e S t a t e
The verifier must be enabled to scan and check the quality of bar codes
as they are printed.
To change the setting, from the Main Menu, select Setup, then Verifier.
Then follow these steps.
Press
or
1.
VERIFIER
State
2.
Press Enter/Pause. The current setting is displayed, for example:
VERIFIER
Disabled
3.
Press
or
you want, press Enter/Pause.
4.
Press Escape/Clear until you see the Main Menu.
5-2 Operating Instructions
until you see
to see the other option. After you display the option