Additional Examples - Avery Dennison Monarch Verifier 938 Operating Instructions Manual

Additional Examples

{V,1,A,T,"BEAMON"¦
D,"~LV02"¦}
{F,1,A,R,E,200,200,"Fmt1"¦
...}
The printer uses verifier configuration packet #1 until another verifier
configuration packet is sent. Or, until a format is sent that references a
different verifier configuration packet already stored in the printer's
memory using the verifier field.
{F,9,A,R,E,200,200,"Fmt9"¦
V,3¦
...}
The printer uses verifier configuration packet #3 for format #9, since this
format includes the verifier field. Verifier configuration packet #3 must
already be stored in the printer's memory before the printer receives the
format packet that references it. See "Defining the Verifier Field," for
more information.
4-10 Operating Instructions
Verifier configuration packet #1 is passed
directly to the verifier's temporary memory
and named "BEAMON." It is not stored in
the printer.
Additional verifier commands may be
included within quotation marks. Refer to
the SV Series Opreator's Guide for more
information.
Format packet #1 is stored in the printer's
memory and named "Fmt1."
Additional fields in the format are not
shown.
Format #9 is stored in the printer's memory
and named "Fmt9."
The verifier field calls for verifier
configuration packet #3 to be used with
this format (format #9).
Additional fields in the format are not
shown.