Operating State - Avery Dennison AP 4.4 User Manual

05/04 Rev. 1.2-03
Offline Mode
Online Mode
Message Mode
USER MANUAL
AP4.4 – AP5.4
For more detailed descriptions of the button functions, please see
– sections Operation in Offline Mode
Mode on page 19
– or "Info-Printouts and Parameters".

Operating State

Display
OFFLINE 0 JOBS No jobs are waiting to be processed.
Tab. 1:Display in offline mode.
Printer settings can be made when the device is offline. The offline mode is
normally active when the printer is switched on. Print jobs are received, but
not processed, via the selected interface.
To adjust the printer so that it goes online directly after you have switched
it on, set the following parameter to Online:
SYSTEM PARAMETER > Turn-on mode
In the online mode, print jobs are received and processed immediately.
Display
ONLINE 0 JOBS
ONLINE 0. JOBS Current data transfer to the printer is shown on
ONLINE 13 JOBS
Restcount: 25
ONLINE 13 JOBS
Restcount: endless
Tab. 2: Possible messages in the online mode.
To stop printing, press the online button.
The printer uses the message mode to signal an error or a particular opera-
ting status. Message mode indicates that the printer is waiting to quit or for a
fault to be corrected. When exiting, the printer switches from message mode
to offline mode (depending on the error and the progress of the previous pro-
cess).
Display
Status 5001
No punch detected
Tab. 3: Example of a message.
The messages shown in Table 3 occur when e.g. the printer is set for using
labelling material with perforation, but continuous form material without per-
foration is inserted. In this example, the printer will continue to feed the ma-
terial for a few seconds before it finally sends an error message.
on page 17 and
Meaning
Meaning
No jobs are waiting to be processed.
the display: This is indicated on the right, under-
neath the number of loaded jobs.
During printing, the display also shows the num-
ber of print jobs read (13) and the remaining num-
ber of labels (25) to be printed in the current job.
If a print job recognizes an infinite number of la-
bels to be printed, then the remaining number for
this job is also shown as infinite.
Meaning
Messages are made up of the status number and
a brief descriptive text.
Setup & Operation
Operation in Online
12