Kyocera TASKalfa 3510i Service Manual page 524

Adjusting
Item
order
Adjusting the left and right margins
(printing adjustment)
9
Adjusting magnification of the
scanner in the main scanning direc-
tion
10
(scanning adjustment)
Adjusting magnification of the
scanner in the auxiliary scanning
direction
(scanning adjustment)
11
Adjusting the center line
(scanning adjustment)
12
Adjusting the leading edge registra-
tion
(scanning adjustment)
13
Adjusting the leading edge margin
(scanning adjustment)
14
Adjusting the trailing edge margin
(scanning adjustment)
15
Image Description
LSU illumination start/end timing
Data processing
Original scanning speed
Adjusting the original scan data
(image adjustment)
Original scan start timing
Adjusting the original scan data
(image adjustment)
Adjusting the original scan data
(image adjustment)
Maintenance mode
Original
Item No. Mode
U402 A MARGIN U402 test pattern
C MARGIN
U065 MAIN SCAN Test chart
U070 MAIN SCAN(CIS)
U065 SUB SCAN Test chart
U070 SUB SCAN (F)
SUB SCAN (B)
SUB SCAN (CIS)
U067 FRONT Test chart
ROTATE
U072 FRONT
BACK
CIS
U066 FRONT Test chart
ROTATE
U071 FRONT HEAD
BACK HEAD
CIS HEAD
U403 B MARGIN Test chart
U404 B MARGIN
U403 D MARGIN Test chart
U404 D MARGIN
2-4-19
Page Remarks
P.1-3-114
P.1-3-41 U065: For copying an original placed on the
P.1-3-46 platen.
U070: For copying originals from the DP.
P.1-3-41 U065: For copying an original placed on the
P.1-3-46 platen.
U070: For copying originals from the DP.
To make an adjustment for second side: select
SUB SCAN(B) :Mechanism reversal model
To make an adjustment for second side: select
SUB SCAN(B) :Double-sided simultaneous
reading model
P.1-3-44 U067: For copying an original placed on the
platen.
To make an adjustment for rotate copying, select
P.1-3-50 ROTATE.
U072: For copying originals from the DP.
To make an adjustment for duplex copying, select
BACK. :Mechanism reversal model
To make an adjustment for duplex copying, select
CIS. :Double-sided simultaneous reading model
P.1-3-43 U066: For copying an original placed on the
platen.
To make an adjustment for rotate copying, select
P.1-3-48 ROTATE.
U071: For copying originals from the DP.
To make an adjustment for duplex copying, select
BACK HEAD. :Mechanism reversal model
To make an adjustment for duplex copying, select
CIS HEAD. :Double-sided simultaneous reading
model
P.1-3-115 U403: For copying an original placed on the con-
tact glass
P.1-3-116 U404: For copying originals from the DP.
P.1-3-115 U403: For copying an original placed on the con-
tact glass
P.1-3-116 U404: For copying originals from the DP.
2NL/2P8