Upgrading The Firmware; Safe-Update - Kyocera TASKalfa 3510i Service Manual

Hide thumbs Also See for TASKalfa 3510i:
Table of Contents

Advertisement

1-6 Upgrading the firmware

1-6-1 Upgrading the firmware
Follow the procedure to upgrade the firmware below.
* Controller data
* Operation panel data
* Engine PWB software
* Scaner PWB software
* Operation panel PWB software
* Option Language data
* Dictionary data
* Browser data
* FAX PWB software
* 1000-DF software
Preparation
Extract the file that has the download firmware and store them in a USB Memory.
NOTE: To improve Firmware Upgrade speed, a separate SKIP file can be added to the USB Memory Stick
with the Firmware Upgrade package. The Skip file will allow ONLY the Firmware that has been
Upgraded to a New Version to load, skipping duplicate Firmware Levels.
Procedure
1. Turn ON the main power switch and
confirm if the screen shows "Ready to
print" then, turn OFF the main power
switch.
2. Insert USB memory that has the firm-
ware in the USB memory slot.
3. Turn ON the main power switch.
4. About 50 seconds later, "Farmware
Update" will be displayed (this shows
that downloading is ready to start).
5. The software under update of the pres-
ent firmware is displayed.
6. Confirm that upgrading is completed.
7. Confirm that the version of the firmware is
correctly displayed.
8. Turn OFF the main power switch and
remove the USB memory.
Caution:
Never turn off the power switch or remove the USB flash device during upgrading.

Safe-UPDATE

If the device is accidentally switched off or the USB memory is disconnected and upgrading is incomplete,
perform the following.
If the power is accidentally switched off, turn the power on without removing the USB memory and perform the
above steps 3 through 8.
If the USB memory is disconnected, reinsert it, then turn the power on and perform the above steps 3 through
8.
In any case, complete the steps to the end.
* 3000-DF main unit software
* 3000-DF mail box software
* 500x2-PF software
* 3000-PF software
* DP software (Duplex/Reverse)
* PUNCHUNIT software
* OCR Dictionary data
USB memory
1-6-1
USB memory slot
Figure 1-6-1
2NL/2P8-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 3010i

Table of Contents