U167 Checking The Fuser Count; U198 Set Fuser Phase Control - Kyocera TASKalfa 3510i Service Manual

Item No.
Checking the fuser count
U167
Description
Displays the fuser count for checking.
Purpose
To check the fuser count after replacement of the fuser unit.
Method
1. Press the start key. The fuser count is displayed.
2. Change the setting value using the +/- keys or numeric keys.
Display
Cnt
Clear
3. Press the start key. The value is set.
Clearing
1. Select [Clear].
2. Press the start key. The counter value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Set Fuser Phase Control
U198
Description
Changes the fuser phase control.
Purpose
Performs for the change of the fuser phase control.
Method
1. Press the start key. The fuser count is displayed.
2. Change the setting value using the +/- keys or numeric keys.
Display
Mode
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Fuser count value
Fuser counter
Description
Settings of the phase control mode.
1-3-70
2NL/2P8-A
Setting Initial set-
range ting
0 to 9999999 0
- -
Setting Initial set-
range ting
0 to 2 1