Detaching And Refitting The Drive Unit 2 - Kyocera TASKalfa 3510i Service Manual

(2) Detaching and refitting the drive unit 2

Procedures
1. Remove the rear cover.
(See page 1-5-5)
2. Remove five connectors.
3. Remove four screws and then remove
the drive unit 2.
4. Check or replace the drive unit 2 and
refit all the removed parts.
Drive unit 2
Screw
Screw
Screw
Screw
1-5-20
Connectors
Connector
Drive unit 2
Figure 1-5-32
2NL/2P8
Connectors