14. Pass the key card wires through the
bandage lid, bushing and the aperture
parts of the rear cover.
15. Connect the connector of the key card
wires to the engine PWB.
16. Pass the key card wires through the
wire saddles.
17. Fix the grounding terminals using the
screw.
Key card wires
Bandage lid
Bushing
Key card wires
Engine PWB
Wire saddles
Key card wires
Engine PWB
1-2-66
Connector
Figure 1-2-94
Grounding terminal
Screw
Figure 1-2-95
2NL/2P8