U130 Initial Setting For The Developer; U139 Displaying The Temperature And Humidity Outside The Machine - Kyocera TASKalfa 3510i Service Manual

Item No.
U130 Initial setting for the developer
Description
The toner sensor control bias is adjusted so that the sensor output is set as the target value with
the initial developer.
Purpose
Automatically executed when the developer unit loaded with the initial developer is replaced.
Method
1. Press the start key.
2. Select [Execute].The screen for executing is displayed.
3. Select [Execute].
4. Press the start key. Toner installation is started.
* : After the completion of toner installation displays "Finish."
Error code list
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Displaying the temperature and humidity outside the machine
U139
Description
Displays the detected temperature and humidity outside the machine.
Purpose
To check the temperature and humidity outside the machine.
Method
1. Press the start key. The detected temperature are displayed.
External Temp
External Humidity
LSU Temp (K)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
code
When a main part cover opens during execution.
E001
When toner empty is detected during execution.
E002
When full detection of a waste toner box is carried out.
E003
When C call is detected.
E004
Display
External temperature (C)
External humidity ()
Internal temperature around the laser scanner unit (K) (°C)
Description
Description
Description
1-3-65
2NL/2P8-A