Assign Signals To The Master Control Element (Master Module) - Siemens SICAM CMIC User Manual

Engineering via SICAM WEB
5.1.9.2

Assign Signals to the Master Control Element (Master Module)

If you have already defined signals, these can be assigned to the master control element for
the further processing.
This is how to assign signals to the master control element:
·
Click on the button
generation
·
Select the directory
·
Mark on the right side the signals you want to assign
·
Click on the button
The assigned signals are now listed in a table under the tab Assignment.
Note
You can enlarge the work area by clicking on the bars right and/or left beside the work area.
170
on the upper right side to close the workspace for the signals
SICAM CMIC | Master module
(Assign)
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016