Table of Contents
Advertisement
Engineering via SICAM WEB
5.1.9.5.6 Binary Information Output
For the output of binary information a digital output module must be equipped, and the DO
signals to be used must be configured.
With the parameter
output upon failure of the master control element. You find further information thereto in the
manual SICAM RTUs Common Functions Peripheral Elements According to IEC 60870-5-
101/104, chapter "Binary Information Output", section "Deactivation or Retention on Failure".
5.1.9.5.7 Current/Voltage Output
For the output of currents or Voltages an analog output module must be equipped, and the AO
signals to be used must be configured.
With the parameter
output upon failure of the master control element. You find further information thereto in the
manual SICAM RTUs Common Functions Peripheral Elements According to IEC 60870-5-
101/104, chapter "Binary Information Output", section "Deactivation or Retention on Failure".
220
you can determine the behavior of a binary information
Fail_behav
you can determine the behavior of a binary information
Fail_behav
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Advertisement
Table of Contents
