Table of Contents
Advertisement
Engineering via SICAM WEB
The settings on the protocol element reside in the directory tree under
SICAM CMIC | Master module | PRE <0...3>:
IEC 60870-5-101
You find the information thereto in the manual SICAM RTUs Common Functions Protocol El-
ements, chapter "Multi-Point Traffic (UMP)", section "Communication according to
IEC 60870-5-101", "Data Acquisition by Polling (Station Interrogation)".
5.1.7.5
Data Management and Priority Control
The settings for data management and priority controltraffic) reside in the directory tree under
SICAM CMIC | Master module | Communication |
(the checkbox Show all parameters must be activated).
·
Behavior upon communication failure
·
Priority for the emission
You find the information thereto in the manual SICAM RTUs Common Functions System and
Basic System Elements, chapter "Telecontrol", section "Communication with other Automation
Units", section "Data Storage", "Behavior during a Communication Failure" and section "Priori-
ty Control".
162
(applies only for end-end traffic and multi-point traffic).
| Advanced settings |
<protocol name>
PRE<0...3>
| Advanced
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
settings.
Advertisement
Table of Contents
