Checks After Startup - Siemens SICAM CMIC User Manual

6.2.2

Checks after Startup

Cyclic operation
Check of the communication connec-
tions
Communication connections set up
(OK)
Function check of the I/O modules over
the TM bus
I/O modules operational (OK)
Error
Communication failure
Communication error
I/O module error
Load firmware code
System element is shut down and the
firmware code is loaded from the SD
card
Initiate startup of the master control
element for new loaded system ele-
ments (protocol element, peripheral
element)
startup completed (OK)
startup completed (error)
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
RY ER Error/reaction
˜ ˜
Communication error
· Communication failure
· Communication fault
˜ ™
˜ ˜
I/O module error
· Periodical information for the open-/closed-
loop control function
· Diagnosis information
˜ ™
RY ER Note
· Diagnosis
˜ ˜
· Check communication lines
· Check remote station
˜ ˜
Diagnosis
· Diagnosis
˜ ˜
· Replace system (if internal module)
· Replace I/O module (if external module)
RY ER Error/reaction
˜ ˜
˜ ˜
˜ ™
˜ ˜
Service
291