Table of Contents
Advertisement
Service
6.5
Firmware Update
In SICAM CMIC, a new system element or the functionality of a system element can be up-
dated in need. For each system element, an individual loadable firmware is provided. You find
information thereto in section 3.3,
For the accomplishment of firmware updates different methods are possible:
·
Engineering via SICAM TOOLBOX II
─ online
─ offline
·
Engineering via SICAM WEB
─ online
─ offline
6.5.1
SICAM TOOLBOX II
The SICAM TOOLBOX II contains after its installation all current firmware revisions (based on
the date of issue of the installed version).
Procedure for the Update of System Elements
interrogate firm-
ware revision
new firmware
available
import master
data
update target
system
6.5.1.1
Interrogation of the Firmware Revision
The firmware revisions of all configured system elements (master control element, peripheral
element, protocol elements) can be displayed and printed with the tool "Revision Interrogation
and Display" for a selected automation unit.
You find further details on the tool in the SICAM TOOLBOX II Online Help, chapter "Service
Programs", section "Revision Interrogation and Display".
312
Loadable
selection AU
revision
interrogation
Save firmware file on
TOOLBOX PC
select firmware file to
be imported
master data
update
selection AU
load
firmware
Firmwares.
open
start import
load
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Advertisement
Table of Contents
