Table of Contents
Advertisement
6.4.3
Adapt new Mechanical Configuration in the Parameterization
·
Remove the peripheral element in the parameterization and click on the button
·
After request, carry out a startup of the target device
·
Add the peripheral element again and click on the button
·
After request, carry out a startup of the target device
SICAM CMIC "learns" thereby the new mechanical configuration.
Note
Please consider that with the removal of the peripheral elelement the existing parameterization (configu-
ration and settings of the I/Os) is lost.
With startup the parameterization of the learnt I/Os is built up newly with the default values.
6.4.3.1
Adding I/O Modules
To an already existing configuration added I/O modules are recognized by SICAM CMIC and
"learnt" upon startup, without notifying an error thereby. With parameterization via
SICAM WEB, new modules are added automatically in the directory tree.
6.4.4
Replacement of the SD Card
New SD cards can be ordered at Siemens (see SICAM CMIC System Description", chapter
"Order Information").
You find the hints for the replacement of the SD card in section 1.9,
Caution
Insert or remove the SD card only in the de-energized master control module. The contents of a SD card
can become invalid if it is removed during a running write procedure. If occasion arises, the contents of the
SD card must be deleted and written newly again.
You find further technical information in the manual SICAM RTUs Common Functions System
and Basic System Elements, chapter "System Services", section "Data Storage on Flash
Card".
6.4.4.1
Initialization of the Firmware
With use of a suitable, still empty SD card, you must download the firmware CPC80 (and op-
tionally
Firmwares
http://www.siemens.com/sicam
When the required files are stored on the SD card, insert the SD card into the de-energized
target device and switch that on. With restart, the firmwares are configured in the target de-
vice.
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
for protocols and periphery) from the website
and copy it into the root directory of the SD card.
Service
SD
Card.
311
Advertisement
Table of Contents
