Table of Contents
Advertisement
Switch off Test Mode
Precondition: The application program is in the test mode.
If you click on the button
The status changes as follows:
Cold Start
When pressing the button
You have the possibility to abort the procedure.
·
Click on the button
The test mode is switched on and the values of all variables are initialized with 0 and the ap-
plication program is restarted. The program parts PLC_RESET and PLC_INIT are processed
once and if the program has been previously
·
in the
State:
·
in the
State:
Warm Start
When pressing the button
You have the possibility to abort the procedure.
·
Click on the button
The test mode is switched on and the values of the volatile variables are initialized with 0 and
the application program is restarted. The program parts PLC_RESET and PLC_INIT are pro-
cessed once and if the program has been previously
·
in the
State:
·
in the
State:
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
, the test mode will be terminated.
(Cold start), the following dialog is opened:
in order to perform a cold start
running, the program part PLC_START is processed cyclically again
halt, the program processing is halted
(Warm start), the following dialog is opened:
in order to perform a warm restart
running, the program part PLC_START is processed cyclically again
halt, the program processing is halted
Engineering via SICAM WEB
257
Advertisement
Table of Contents
