Service
6.3.3
SICAM WEB
6.3.3.1
Connection Possibilities for the Diagnosis
For the access to the diagnosis data of SICAM CMIC, an online connection of the engineering
PC to the target device is required. Reading access is also possible if the target device was
engineered via the SICAM TOOLBOX II. Writing access (example: startup request to the tar-
get device) is only exclusively possible.
You find the basic connection possibilities in section 3.7.2,
some application examples.
Direct Connection
300
SICAM
Direct cable (RS
-232
)
SICAM RTUs, User Manual SICAM CMIC
WEB. Following you find
Ethernet TCP/IP
DC8-001-2.09, Edition 08.2016