Table of Contents
Advertisement
Characteristic
After loading of a firmware
the loaded firmware revision
does not appear in the con-
figuration page
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Possible cause
Firmware code not load-
ed/configured completely due
to communication fault or op-
erating error (e.g. menu was
quitted prematurely)
Error Handling
Remedy
· Start a new loading process
· Observe progress display
· Loading process is completed cor-
rectly when the indication Upload
successful appears, with hyperlink
to the target device
333
Advertisement
Table of Contents
