Table of Contents
Advertisement
Service
6.1.2.4.4 Alarms
After opening the list, the most recent entry is automatically selected.
In the header you can see which entry you have selected and the amount of all entries.
In the submenu Alarms alarms are displayed in
chronological order (most recent entry first).
In the header you can see which entry you have
selected and the amount of all entries.
After opening the list, the most recent entry is
automatically selected.
You can navigate through the entire list via function keys <▼> and <▲>
In the selected entry you can see detailed information on the selected entry (date,
timestamp, etc.).
Using the function key <TOP>, you go to the beginning of the list (and select the first entry).
The oscillating function key <TOP> shows that a new alarm is active.
·
Press the oscillating function key <TOP> to refresh the entire list
The function key <TOP> will not be oscillating, if you did select the first entry and a new
alarm occurs. In this case, however, the list will be refreshed.
Submenu
3.2
Alarms
*)
no historical alarms
286
Submenu
Display/settings
–
Alarm name
Status
Alarms
0001/0005
Dia Warnin g
comin g
Dia ComError
comin g
Dia ExtError
comin g
Q0_feeder1
fltpos
Dia BoardFail
comin g
ESC
F1
F2
F3
F4
Meaning/range
Freely definable text (applies
for process alarms)
Always beginning with "Dia"
(applies for diagnosis alarms)
· Freely definable text (ap-
plies for process alarms)
· Coming (applies for diag-
*)
nosis alarms)
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
TOP
Advertisement
Table of Contents
