Table of Contents
Advertisement
F.4
SICAM CMIC as Telecontrol Substation with Integrated
Switch for SICAM TOOLBOX II Connection
Features:
·
Communication with the control system via IEC 60870-104
(Ethernet-Interface, X1 or X4, can be set with parameter)
·
Communication with SICAM TOOLBOX II via http/https
(Ethernet-Interface, X1 or X4, can be set with parameter)
·
SICAM CMIC serves as switch between control system and SICAM TOOLBOX II
By means of SICAM TOOLBOX II, which is connected via the integrated switch, it is pos-
sible to reach the local SICAM CMIC and further SICAM RTUs components via the „Con-
trol Center Zone". It depends on the network configuration which can be reached.
·
1 IP address
·
1 subnet mask
·
1 default router
·
Parameter
address (connected ports in switch mode)
Office Zone
Control Center Zone
Substation Zone
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Network settings | IP adress | Mode of Ethernet Ports
SICAM CMIC
Control Center
IP-address:
Subnet mask: 255.255.0.0
Router
IP-address:
172.16.0.254
PREx / ET84
IP-address: 172.16.0.3
X1
Subnet mask: 255.255.0.0
Default router: 172.16.0.254
X4
IP-address:
172.16.0.4
Subnet mask: 255.255.0.0
Default router: 172.16.0.254
SICAM
TOOLBOX II
Use Cases
=
1 IP
172.17.0.22
399
Advertisement
Table of Contents
