Charging The Remote Control - Siemens Tek User Manual

Charging the Remote Control

Charging process
• Connect the remote control with the power plug to a power
outlet. The charging process starts. Charging time is about
5 hours depending on the status of the rechargeable battery
(Fig.13).
Charging is complete when the battery symbol shows a
full battery (Fig.13).
Running time of the rechargeable battery
The running time of the rechargeable battery depends on
the way the remote control is used.
• The most battery-consuming function is the streaming
transmission of audio signals. This function is active when
using the telephone or listening to an external device. The
rechargeable battery will provide about 5 hours of use time
under these circumstances before requiring recharge.
• When no transmission of audio signal is active but a phone
has been paired, the rechargeable battery will last several
days before requiring recharge.
• When no transmission of audio signal is active and no
telephone has been paired, the rechargeable battery lasts
several months before requiring recharge.
• For prolonged operation, the Tek Connect remote control
may be used while plugged in.
16
CHARGING THE REMOTE CONTROL