Change Status Of The Application Program - Siemens SICAM CMIC User Manual

Example: Various variables
The value display happens for each selected variable in the designated data format.
Example: Invalid variable
With invalid variables, like with empty fields, the value unknown is displayed:
Valid are only those variables that are used in the current running IL.

5.2.2.2.3 Change Status of the Application Program

For each possible action, an according button is placed in the logic test page. After each ac-
tion, the current status of the application program is requested from the target device, and the
buttons are enabled or disabled accordingly.
In normal mode of the application program, the state is displayed as follows:
The control buttons are enabled/blocked as follows:
With execution of one of the functions, the test mode is switched on:
·
Halt of the application program (immediately)
·
Cold start of the application program (per request)
·
Warm start of the application program (per request)
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Engineering via SICAM WEB
255