Table of Contents
Advertisement
Example: Setpoint command, normalized
·
In the directory tree, mark the corresponding AO module
·
Click on the side bar left beside the status area, if you want to extend it
·
Mark the row with the desired datapoint
Control area:
·
Select a "New value"
The data format corresponds to the setting of the data point on the I/O module (signal list).
·
Select the "Select before execute" option
With selection
ecute command, when you click on the button
(select_execute_t).
With selection
The new process value is transferred to the target device and displayed in the column Value.
You find further details in the manual SICAM RTUs Common Functions Peripheral Elements
According to IEC 60870-5-101/104, chapter "Setpoint Values by means of Currents and Volt-
ages", section "Select and Execute Command".
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Yes
and button
you activate the select command. You activate the ex-
No
and button
you activate the execute command directly.
Engineering via SICAM WEB
once more within the adjusted time
231
Advertisement
Table of Contents
