7 Expansion with data goggles
Expansion with data goggles
7
7.1
Preparations
Commissioning /Installation
1. Connect the goggles to the controller by cable before starting the device.
2. Press the Power button at the top of the controller to start the device.
Note
You can find more information at
mobile-viewer/moverio-bt-300
Setting up a network connection
After the goggles have started, you can establish a network connection. To
establish a connection to the SIPIX SD, make sure that both devices (EPSON
Movero and SIPIX SD) are in the same network. A mobile hotspot, for example, is
suitable for this purpose.
1. Select the gear icon from the APP list.
2. Select "Wi-Fi" in the "Wireless & networks" section.
Note
If the Wi-Fi function is turned off, turn on the function and select the SSID of the
router or mobile hotspot you are using.
SIPIX SD Series - Remote Services
Entry-ID: 109763098,
V1.0,
https://www.epson.de/products/see-through-
01/2019
2
1
27