GE quality throughout—the inside story
Interior and door liners
GE cabinet and door liners are durable and feature easy-to-clean surfaces that resist grease,
stains, odors and abrasive cleansers. Liners are easy to clean with warm soap and water and
they will maintain their "like new" sheen for the life of the appliance.
All Top and Bottom-Freezers have durable ABS cabinets and door liners.
Side-by-Sides (20, 22, and 25 cu. ft.—K series and below) have baked-enamel-on-steel
cabinets and ABS door liners.
Side-by-Sides (25—L series and higher, 27 and 29 cu. ft.) have ABS cabinets and door liners.
These hassle-free, set-and-forget controls are preset at the
factory for the most efficient normal operation. They are preset
for normal installation with a fresh food setting of 5 (or 37°F)
and a freezer setting of 5 (or 0°F). Having them pre-set
reduces the risk of the customer setting the temperature
incorrectly! They are located in the front of the fresh food
compartment (most models) for easy adjustments.
Automatic moisture control
A condenser loop in the freezer walls automatically cycles hot
gas, preventing moisture from forming between the freezer
and fresh food sections and on the cabinet exterior. No
energy is used to run a heater; the heat from the gas is
utilized to eliminate condensation.
Galvanized steel doors
This provides extra protection from rust, especially important
in tropical environments with highly corrosive ambient
conditions such as high humidity with no air conditioning and
salt spray exposure. An ENTIRE galvanized case is available
on select models.
Side-by-Sides—L series and higher
Bottom-Freezers—20 & 22 cu. ft.