Ford Transit 2002 Owner's Manual page 196

1. Remove the clip.
2. Remove the bolts.
11. Detach the clutch master cylinder actuating rod
from the clutch pedal.
12. Remove the brake pedal retractor retaining bolt
(if equipped).
13. Remove the brake pedal bracket.
Installation
All vehicles
NOTE: Make sure the brake pedal locates
1.
into the brake booster actuator rod clevis.
Install the brake pedal bracket.
2. NOTE: Do not fully tighten the brake booster
retaining nuts at this stage.
Install the brake booster retaining nuts.
NOTE: Do not fully tighten the brake pedal
3.
retractor arm retaining bolt at this stage.
Install the brake pedal retractor arm retaining
bolt (if equipped).
http://vnx.su