Measure The Oil Pressure (1.8L Engine) - Ford Transit 2002 Owner's Manual

22. 22. Install the glow plug relay.
23. 23. Reset the PCM fault memory.
Measure the oil pressure (21 113 0)
The oil pressure depends on various factors (engine speed, oil temperature, oil viscosity,
amount of oil filter contamination etc.).
NOTE: Measure the oil pressure at the specified engine speed. Measure the oil pressure at
an oil temperature of 80° C.

Measure the oil pressure (1.8L engine)

1. 1. Raise and support the vehicle. REFER to Section
2. 2. Disconnect the oil pressure switch electrical connector and remove the oil pressure
switch.
3. 3. Attach the oil pressure gauge with oil pressure gauge connector, and arrange it so
that the reading can be made from above.
4. 4. Lower the vehicle.
5. 5. Check the oil pressure.
6. 6. Raise and support the vehicle. REFER to Section
7. 7. Detach the oil pressure gauge and connector.
8. 8. Coat the oil pressure switch with oil pressure switch sealer (WSK-M2G349-A7).
9. 9. Install the oil pressure switch and connect the oil pressure switch electrical
connector.
100-02 Jacking and
100-02 Jacking and
http://vnx.su
Lifting.
Lifting.