MUTOH VC-600 User Manual page 17

ValueCut USER MANUAL
Step 3

Place the stand beam upright on the T-stand and follow number (1) (2)to assemble. (See Figure
2-4 & 2-5)
Step 4
Position the stand beam perpendicularly to part (1)and put the screws into the holes and tighten them as
Figure 2-5. Then the complete picture of stand will be like Figure 2-4.
V5a 2015 Jan
(1) T-Stand
(2) Stand beam
Figure 2-4
17
Installation
Figure 2-5