Cut Contour; Image Print; Cut Contour Window - MUTOH VC-600 User Manual

FlexiSTARTER Quick Start Guide

8.10 Cut Contour

8.10.1 Image Print

Print on a printer registered in a computer from the FlexiSTARTER ValueCut Edition. Select "Print..."
from the File menu and print cutting data of the cut contour. As to the printing procedure, refer to the
printer manual you use.

8.10.2 Cut contour window

Select "Cut Contour" from the File menu, then the Cut Contour window may open.
It has three tabs.
General tab

Set up:

Material size

Position
Option tab

Set up a cutting of the ValueCut like the driver options.
Advanced tab

Set up applicative cutting job.
86
ValueCut USER MANUAL
V5a 2015 Jan