Menu In Off-Line Mode - MUTOH VC-600 User Manual

ValueCut USER MANUAL

3.3 Menu in Off-line Mode

Press [ON/OFF LINE] to switch to the offline mode
Offline For
System Setup
[ FORCE]
[ OFFSET ]
[ DATA CLEAR ]
[ Arrow Key ]
[ SPEED ]
[CUT TEST ]
V5a 2015 Jan
Force:
Offset: 0.250
Clear data memory
N:ONLINE
~|{} move origin
X:
Speed:
Select:{}
UP Speed:
Select:{}
Quality:
Select:{}
Square Cut
Select:{} Ok:ENTER
Repeat AAS Job
Select:{} Ok:ENTER
Redo Jobs in Memory
Select:{} Ok:ENTER
Pattern Setting
Select:{} Ok:ENTER
Ratio Setting
Select:{} Ok:ENTER
Blade Length Adjust
Select:{} Ok:ENTER
80 gf ~
5~600 with an increment of 5(gram force)
Ok:ENTER|
mm ~
Ok:ENTER| 0.000~1.000 with an increment of 0.025(mm)
Ok:ENTER
Y:
72 cm/s~
Speed:3~153 with an increment of 3(cm/s)
Ok:ENTER|
72 cm/s~
UP Speed
Ok:ENTER|
Normal~
Draft, Fair, Normal, Fine, Small Letter
Ok:ENTER|
Pattern: Arrow
Change:~|
Ratio:
Change:~|
Set Length 0.00
Change:~|
37
Control Panel
:3~153 with an increment of 3(cm/s)
Pattern: Cross, Arrow
Ok:ENTER
100 %
Ratio: 100% - 400%
Ok:ENTER
mm
Ok:ENTER
Test Blade Holdeｒ
Ok:ENTER
Test Blade Length
Ok:ENTER
Turn CW 1
N:ONLINE Ok:ENTER
Turn